For per-installation using F6 method only: 1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package. 2. Create a floppy* containing the following files in the root directory: iaAhci.inf, iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and TxtSetup.oem. * Note: For Windows Vista you can use a floppy, CD/DVD or USB. 3. For Windows XP or later operating systems: - At the beginning of the operating system installation, press F6 to install a third party SCSI or RAID driver. - When prompted, select 'S' to Specify Additional Device. - Continue to step 5. 4. For Windows Vista: - During the operating system installation, after selecting the location to install Vista, click Load Driver to install a third party SCSI or RAID driver. - Continue to step 5. 5. When prompted, insert the media (floppy, CD/DVD or USB) you created in step 2 and press Enter. 6. At this point you should be presented with a selection for one of the controllers listed in the Overview (Section 1) of this document depending on your hardware version and configuration. 7. Highlight the selection that is appropriate for the hardware in your system and press Enter. 8. Press Enter again to continue. Leave the floppy disk in the system until the next reboot as the software will need to be copied from the floppy disk again when setup is copying files.
Скачать