Fixes: - Communication between the HP Integrated Lights-Out (iLO) and the HP Smart Array controller may be lost resulting in an IML entry indicating a failed controller. - In some cases, incorrect drive temperatures were reported in an HP D2220sb enclosure, resulting in a system shutdown. - VMware might hang when a VM with 2 or more RDMs used a Smart Array controller to access an HP P2000 G3 or HP MSA 2040 SAN storage device. - Improved RAID 1 performance for small block random write workloads on SSD configurations. - A controller lockup could occur if the controller was configured with a SmartCache smaller than 8GB. - On some power cycles, the supercap would always report that it was charging, even though charging had completed. - A self-test was revised to correct for false encryption engine failures. - Following a reboot, a 0x13 lockup error could occur while encrypting an existing logical volume. - When a Solid State Drive was hot-removed during IO and HP SmartPath was enabled, a 0xE3 lockup could occur. - Fixes for various POST messages that were displayed when an HP ProLiant DL580 Gen8 server was running UEFI have been implemented. Examples of the POST Messages that were displayed are: Uncorrectable memory error, Inconsistent Drive count message, and Legacy POST ASSERT with bootable HDD removed. Enhancements/New Features: - Enabled support for 4GB cache modules, which is an available option for the HP ProLiant DL580 Gen8 server . This Smart Component provides firmware for the following storage controllers: - Smart Array P230i - Smart Array P430 - Smart Array P431 - Smart Array P731m - Smart Array P830i - Smart Array P830
Скачать