This utility will examine your system configuration and detect all Solid State Drives installed. It will then check the firmware revision of the drive and judge whether your PC requires a firmware update or not. If required, it will prompt you to run the appropriate firmware update program for your drive. Installation Guide: - Download Firmware Update Utility ZIP file from Lenovo Web site and save it on your desktop. - Extract Firmware Update Utility ZIP file. - Execute "fwwinsd.exe" in the folder, then a utility window will open. - The detected drive(s) will be listed in the utility window. If a detected drive requires an update, it will be shown with asterisk mark on the left. Select the target drive for firmware update, then press "Start Update" button on the window. - If no drive is detected, or a detected drive does not require a firmware update, you cannot continue executing firmware update. - Press "Cancel" button to exit the utility. - A warning message will appear on the window. When you are ready to start firmware update, press "OK" button. - A confirmation window will appear on the screen. Press "Yes" button to continue. - After a successful firmware update, "Firmware update is SUCCESSFUL" message will appear on the screen. Press "OK" button. - On "Shutdown Required" message window, press "Yes" button to shutdown and reboot PC.
Скачать