Fixes: - Port description feature to allow description be added to each port - Add support for new switch model GSM7328FS - Add “show mac-addr-table <vlan id>” command that shows mac addresses learned per VLAN - The “show mac-addr-table” command now supports '<mac-addr>' option without requiring <vlan id> option - Add “configure terminal” command which works the same as “configure” command - Logical Interface name (e.g. “vlan <id>”, “lag <id>”) display changes missing in some CLI commands. - SNMP MIB objects, etherStatsOversizePkts, etherStatsJabbers, SyRmSnRmEs, are not functioning properly. - Port Config pop menu fails in JRE 1.6.0 - GSM73xxS: IGMP snooping not working - Configuration script file could not be executed completely with certain configuration - DHCP server client config show run output has bad client-identifier - Rebooting when building 200 neighbors and receiving 2 routes from each neighbor - GSM73xxS: Fan Status always reported as OK in show hardware output - FSM73xxS: Diffserv Class with matching condition mac address and mask is not working. - DHCP client: switch crashes while obtaining address from server - SNMP SET operation not being done properly on the object - 'agentStpConfigRevision' - RIP: wrong route will be sent when changing its subnet mask frequently - GSM73xxS: 10G fiber ports showed media type as copper - GSM73xxS crashes when enable/disable OSPF on the remote end more than 2 times - SNMP: configuration script contains SNMP setup would fail to apply - FSM7328S crash with banner file download - SNMP: command 'no snmp-server community ipmask 255.0.255.0' failed - SNMP: command line inconsistent with running-config - port-channel static should be configured in "interface lag <lagid>" mode
Скачать