Fixes: - Fix "load previous values" function - Fix memory TWR value setting - Improve PCI-E compatibility - Fix system cannot boot when setting manual CPU core Windows Installation: - Download the .zip file for your motherboard - First go into your BIOS and load defaults, save and exit - Close all open programs. - Go into the folder where you unzipped this package and run the appropriate batch file with full administrator rights. - For Windows XP, Vista or 7 32Bit: FPTWIN32.BAT - For Windows XP, Vista or 7 64Bit: FPTWIN64.BAT - Press Y in CAPITAL LETTERS to start the flash process - DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS - After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup. NOTE: - If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version. USB Flash/DOS Drive Installation: - Create a bootable disk. - Extract the above .zip file to your bootable disk. - From a DOS prompt, run fptdos.bat - Press Y in CAPITAL LETTERS to start the flash process - DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS - After the flashing is finished, shut the system down completely. Then power on again. Important: - After flashing verify that the correct flash was applied by checking the version number on the lower right corner of the BIOS screen.
Скачать