NEW FEATURES: - Major upgrade to the audio level meters. - All 14 channels have large meters on the audio page. - Peak and average levels with digital clipping indicator, and VU ballistics. - Accurate -30 to 0 dB (dBFS) shown with -18dB and -20dB alignment levels marked. - 2 or 14 channels viewable on monitor page. Option found in Menu/Display. - Frame accurate audio delay option to adjust any digital or analog Audio delays. Option found in Audio page. - Added Canon 5D Mark III input color correction to match REC709 standard. Option found in Menu/Display. - WFM stays enabled when using the previous/next movie buttons in playback. - When 2:2 pulldown is on, a “2:2” icon is displayed next to the input format indication. NEW FIXES: - Fixed very infrequent problem with incorrect mov file header with some cameras resulting in some video incorrectly displayed. - Fixed difficulty with setting year if date is completely reset. Year setting now starts at 2013. - Improved drive size calculation to ensure recordings will not attempt to start when the drive is full. - Recording now uses default file names when Red file naming is enabled, but camera is not a Red camera. - Red file naming has dropped the _Txxx suffix. Filename is now exactly the same as internal camera name. UPDATE PROCEDURE: - Download and unzip (if necessary) the ATOMBLD.FW file - Copy the file onto a recommended, formatted drive, using the docking station included with your recorder - Insert the drive into the Atomos recorder - Power up the Atomos recorder - The screen will show flashing lines of colour. This is normal – DO NOT power off! - Updating will take a few minutes - Once completed, the Atomos recorder will power down - Power up the Atomos recorder again - Check Menu > Samurai Blade Info > AtomOS Version – this should match the version you have just downloaded - Continue to enjoy your updated Atomos recorder!
Скачать