Fixes: - Removed Access Control function. - [Access control]The "Access control" can't work normally (by removing this function). - [GUI] channel (2.4G and 5G) display error in router status page when disable wireless radio. - 2.4G wireless network with security mode as TKIP, AES and Mixed mode is disabled when enabling its 5G repeating function. - Router can be set to be repeater with invalid IP address when it is enabled 5G wireless repeating function. Important Note: - Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only. - The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade. - If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, you can still check the status using Power LED. The Power LED should be blinking (amber) during firmware upgrade. After firmware upgrade is done and boots up the system, it changes to steady amber color. - Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it may result to a corrupt firmware and cause the device not to work.
Скачать