Fixes: - Improved Graphics rendering on DisplayLink screens when using a basic graphics theme. - Improved desktop layout experience on Windows 7 and Windows 8 - Support for DisplayPort to HDMI adapters with audio - Critical bug fixes and compatibility improvements for all products - Occasionally on Windows 7, applying a layout change involving DisplayLink screens can change the resolution of or turn off one or more screens. To recover, press the Windows+P keys and select a different setting. (6010, 8741, 9768, 8618, 9956, 10739, 12300, 12715, 13166, 13167, 13226, 13296, 13334) - Video in Basic Mode does not work after a Windows Update. (1609, 3883) - On Windows 7/Vista WDDM Basic, video is not supported. It may work in some cases but exhibits poor performance. It may stop working after an update from Windows Update that affects the graphics subsystem. (2028) - On Vista and Windows 7 in Basic Mode, video will not play on DisplayLink screens after installation until the PC is rebooted. In Aero mode no reboot is needed before video will play. (4432) - Audio on DL3x00 devices is not automatically default when first connected to Windows XP systems. (13511) - Some systems may not boot into Windows when DisplayLink device is connected. (13657) - USB 3 connection dropping to USB 2 during power state transitions with some DL3x00 devices. (13769) - Occasionally after installation the Ethernet driver for the DisplayLink device will not load. Unplug and replug to recover. (12050) - Sometimes changing mode or layout position of a DisplayLink monitor may fail with a "Cannot write to specific device" message in the system tray. To recover replug the device. (13517) - All screens are black after several layout changes on some machines. (13550) - Wrong audio jack information. (13496) - Sometimes a DisplayLink monitor connected through DisplayPort may flash after a resolution change. (13342) - On some Windows XP systems connecting a network cable to a DisplayLink device causes the address bar of Windows Explorer to start blinking. (12568) - On some systems all displays may be black or flashing when resuming from display power save. (13582) - Sometimes all screens are black after resuming from sleep. (13471) - DisplayPort monitor may remain black after being connected to a DisplayLink device. (13577) - HDMI audio stops playing after some time. (13307) - Audio not available on DisplayPort monitors immediately after drivers installation. (13580) - Ethernet on DL3x00 devices unreliable when connected to specific Gigabit Ethernet switches. (13161) - Default volume on DL3x00 devices too high. (13608) - Optimized for Video option removed from Devices and Printers. (13746) - HDMI compliance timing fails at resolution 640 x 480@60. (13652) - On some systems using Renesas USB 3.0 host controller disconnecting the DisplayLink device while playing video may cause system to hang for up to 2 minutes. System will automatically recover after that time. (13364) - Sometimes all monitors can get blank if trying to mirror two DisplayLink monitors connected to the system. (13355) - Sometimes enabling previously switched off main monitor may cause all displays to flicker. (13149) - Sometimes a blue screen can occur when disconnecting DisplayLink device while having another monitor connected to laptop's main VGA/DVI port. (13256) - PowerDVD 12 crashes with DisplayLink software installed. (13668) - Ethernet connection dropping out under heavy load on 10Mb networks. (13688) - USBCV tests not passing (13879, 13896, 13878) - Occasional failure in resuming from sleep for DL3x00 devices. (13440) - Repeated replugging of certain Display Monitors can cause indeterminate behavior. (13581) - Failure to detect some hot swapped DVI monitors. (13597) - In particular circumstances a DL3x00 device can drop from SuperSpeed to High Speed USB. (13769) - Fullscreen Direct X Metro applications will be software rendered on DisplayLink and non-DisplayLink screens.
Скачать