CPU 1. Support for an Intel Core 2 Extreme processor/Intel Core 2 Quad processor/Intel Core 2 Duo processor/Intel Pentium Dual-Core processor/Intel Celeron processorin the LGA 775 package 2. L2 cache varies with CPU Front Side Bus 1. 1600/1333/1066/800 MHz FSB Chipset 1. North Bridge: Intel P45 Express Chipset 2. South Bridge: Intel ICH10R Memory DDR3: 1. 2 x 1.5V DDR3 DIMM sockets supporting up to 4 GB of system memory 2. Dual channel memory architecture 3. Support for DDR3 2000+/1600/1333/1066/800 MHz memory modules DDR2: 1. 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory 2. Dual channel memory architecture 3. Support for DDR2 1333+/1066/800/667 MHz memory modules Audio 1. Realtek ALC889A codec 2. High Definition Audio 3. 2/4/5.1/7.1-channel 4. Support for S/PDIF In/Out 5. Support for CD In LAN 1. 1 x Realtek 8111C chips (10/100/1000 Mbit) Expansion Slots 1. 1 x PCI Express x16 slot, running at x16 (The PCI Express x16 slot conforms to PCI Express 2.0 standard) 2. 3 x PCI Express x1 slot 3. 3 x PCI slots Storage Interface South Bridge: 1. 6x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices 2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10 GIGABYTE SATA2 chip: 1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices 2. 2 x SATA 3Gb/s connectors (GSATA2_0, GSATA2_1) supporting up to 2 SATA 3Gb/s devices 3. Support for SATA RAID 0, RAID 1 and JBOD iTE IT8718 chip: 1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive IEEE 1394a 1. T.I. TSB43AB23 chip 2. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header) USB 1. Integrated in the South Bridge 2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers) Internal I/O Connectors 1. 1 x 24-pin ATX main power connector 2. 1 x 8-pin ATX 12V power connector 3. 1 x floppy disk drive connector 4. 1 x IDE connector 5. 8 x SATA 3Gb/s connectors 6. 1 x CPU fan header 7. 2 x system fan headers 8. 1 x power fan header 9. 1 x front panel header 10. 1 x front panel audio header 11. 1 x CD In connector 12. 1 x S/PDIF In header 13. 1 x S/PDIF Out header 14. 2 x USB 2.0/1.1 headers 15. 1 x IEEE 1394a header 16. 1 x parallel port header 17. 1 x serial port header 18. 1 x power LED header 19. 1 x chassis intrusion header Back Panel Connectors 1. 1 x PS/2 mouse port 2. 1 x PS/2 keyboard/mouse port 3. 1 x optical S/PDIF Out connector 4. 1 x coaxial S/PDIF Out connector 5. 8 x USB 2.0/1.1 ports 6. 2 x IEEE 1394a ports 7. 1 x RJ-45 ports 8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line I/O Controller 1. iTE IT8718 chip H/W Monitoring 1. System voltage detection 2. CPU/System temperature detection 3. CPU/System/Power fan speed detection 4. CPU overheating warning 5. CPU/System/Power fan fail warning 6. CPU/System fan speed control BIOS 1. 2 x 8 Mbit flash 2. Use of licensed AWARD BIOS 3. Support for Dual BIOS 4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b Unique Features 1. Support for @BIOS 2. Support for Q-Flash 3. Support for Dual BIOS 4. Support for Download Center 5. Support for Xpress Install 6. Support for Xpress Recovery2 7. Support for EasyTune 6 8. Support for Dynamic Energy Saver Advanced 9. Support for Time Repair 10. Support for Q-Share Bundle Software 1. Norton Internet Security (OEM version) Form Factor 1. ATX Form Factor; 30.5cm x 24.4cm It is highly recommended to always use the most recent driver version available. Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Скачать